Plug power cable as well as the video cable into the XBox (otherwise you'll be stuck with a solid yellow light). First disconnect the DVD-Rom & hard drive from the motherboard. How To:īefore taking a reading you'll first have to understand how to take a reading, of course. Note the yellow marker in the picture is to verify where the dot on the eeprom chip is, use this as a guide for all other models. To be safe, connect to the pins listed on the eeprom chip itself or do a quick search based on the version you're working with. Now you're ready for your first reading! The picture provided shows the SDA & SDL locations on the 1.6 LPC however I am unsure of the locations for other versions. After verifying, hit 'ok' in PonyProg and 'Setup' again, "Calibrate" (if it doesn't automatically insist). In the list should say "Ports (COM & LPT)", the underneath, "Communications Port (COM'#')". If you're unsure, (on a Windows OS) right now press the Windows key + R and type devmgmt.msc. At this point, choose which COM port has your serial cable attached to it. To set up PonyProg, choose 'Setup' at the top of the screen and 'Interface Setup.'. The 4.7k ohn resistors I've used here consists of four bands Yellow, Purple, Red & Gold. If unsure of the resistance, there's a free app on the Google Play Store called ElectroDroid that will assist you with the resistance according to colored bands for your convenience. I myself have built one of these cables with four (2 twisted together separately) 2.2k ohn resistors without running into any problems. I believe you may use anywhere from 3.9k ohms to 4.7k. What I mean is say you only have half of the required ohms, you may twist two together to get the desired amount. Razor Blade (optional) Note that these resistors are stackable. Grinding Wheel (not pictured) Parts List: 1. Did you try to ftp the file out while having the xbox running the softmod just or if you got a memory card use the file broweser to locate it and copy it over to a memory card, and i have noticed that about the fatxdrive some reason it doesnt show up when but memory cards do i think the drive has to be unlocked although i never used it with a drive before so couldnt tell ya, but i believe i did see a program that can recreate a eeprom it was called config magicĮasiest way would to ftp it out or the copying it to memory card or usb device with the help of a usb to xbox dongle hack which is very easy to do just have to expose the wires on the controller have a spare usb cable around or pick one up from dollar store like i did cut it half and keep the female end and just wire the wires together usuaslly its straight up like black to black red to red only wire that doesnt get used is the yellow if it doesnt work first time then probably have the wires on wrong ones.In this build we'll be using a few different tools than our last build and creating most of our solder points at the base of the serial port.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |